Click here to use UnoHelper to easily setup UnoDNS instead.


Setting up UnoDNS on Windows 8


Step - 1: 

Open your web browser and go to http://www.unotelly.com/unodns/global

Please note down the two nearest DNS addresses from your physical location.


Note: If you wish to use our new Dynamo feature, please make sure you use Dynamo enabled DNS servers.  

Please refer to this link for more information: What is UnoDNS Dynamo?  


Step - 2: 

On Metro screen, move your mouse to the top right corner and click 'Search'.




 

Step - 3: 

In the search box, enter 'Control Panel' and open it.


 


Step - 4: 

Click on 'Network and Internet'.


 


Step - 5:

Click on 'Network and Sharing Center'.


 



Step - 6:

Click on 'Change Adapter Settings'.


 


Step - 7:

If you are using wireless internet:

Right click on 'Wi-Fi', and click on 'Properties'.

                          -OR-

If you are using ethernet/cable connection:

Right click on 'Ethernet', and click on 'Properties'.


 



Step - 8:

Click on 'Internet Protocol Version 4 (TCP/IPv4)' and click on 'Properties'.


 


Step - 9:

Choose 'Use the following DNS server addresses' and enter the two number you acquired from: http://www.unotelly.com/unodns/global 

Choose these number based on the closet distance to your current physical location. After entering, click 'OK' to save settings.


 

 

Step 10 - DONE!

After that, click 'OK' and close everything. Close all of your browsers to apply the settings as well. Then go to Quick Start to verify that your service is active.