Step 1
 Open any browser and go to www.unotelly.com/unodns/global.

Please note down the two nearest DNS addresses to your physical location.


Note: If you wish to use our new Dynamo feature, please make sure you use Dynamo enabled DNS servers.  Please refer to this link for more information about Dynamo : What is UnoDNS Dynamo? 


Step 2 

Click "START" and Open "Control Panel".
 

1.webp


Step 3
Under "Network and Internet" click "View network status and tasks".

2.webp

Step 4
On the left side, click "Change adapter settings".

3.webp

 


Step 5

i. If you are using wireless internet:

Right click on Wireless Network Connection, and click on Properties


or

ii. If you are using Ethernet/cable connection:

Right click on Local Area Connection, and click on Properties


4.webp


Step 6
Choose "Internet Protocol Version 4(TCP/IPv4)", and click on "Properties".

5.webp


Step 7
Click on "Use the following DNS server addresses" and enter the DNS addresses you got by visiting www.unotelly.com/unodns/global in Step 1.
 

step3_original.webp




 
 Step 8 - Done!
After that, click OK and close everything. Restart your computer and go to Quick Start to see if your service is active.


If DNS is correctly configured on the device, it will display "UnoDNS Setup and Account are active."