[Important]
To ensure that Unotelly service is compatible with your current network, please first test out UnoDNS on your PC/Mac,

visit quickstart.unotelly.com and check for the message "UnoDNS Setup and Account are active."

Once you have confirmed Unotelly service to be compatible, go to www.unotelly.com/unodns/global and note down the two closest DNS server to your current location.


STEP 1:
Click on “Settings”



STEP 2:
Under Settings, click on "General"

01_General.jpg

STEP 3:
Under General, click on "Network"

02_Network.jpg

STEP 4:
Under Network, click on "Configure TCP/IP"

04_Configure_TCP-IP.jpg

STEP 5:
Do this, if this is the first time you are connecting your ATV to the internet.  If your device is already connected, skip to STEP 7.
Under Network Setup, click on "Automatically".  This will auto configure the IP, Subnet and Router address for us.

12_Automatically.jpg

STEP 6:
Click on "Done"

13_Done.jpg

STEP 7:

Go back to Network Setup, and select "Manually" this time.

05_Manually.jpg

STEP 8:
Do NOT changethe IP Address and proceed to the next step.  If you do not have any values within the box, refer to STEP 5.

06_IP.jpg

STEP 9:
Do NOT changethe Subnet Mask values and proceed to the next step.  If you do not have any values within the box, refer to STEP 5.

07_SubnetMask.jpg

STEP 10:
Do NOT changethe Router IP Address and proceed to the next step.  If you do not have any values within the box, refer to STEP 5.

08_RouterIP.jpg

STEP 11:
Enter one of the DNS address you wrote down earlier fromwww.unotelly.com/unodns/global, and click "Done"

09_DNS.jpg

STEP 12:
Click on "Done" to proceed

10_Done.jpg

STEP 13:
You should now be able to see apps in the main menu.  Your ATV is ready!